#131- Day 27, 31 days of Halloween, Hanging of the raven.

                                                             Hi there, kreepy monsters.

                                                              Are you scared yet????

Today this card is for the Lost Coast Designs Halloween challenge.

You can still participate, it runs until 31.

I started with the door and window stamp set.

I stamped these stamps with versamark and clear embossing powder.

I colored the windows with Brusho soft yellow.

The rest is done with Brusho blue, green and black.

When everything was dry, I removed the ebossing powder with an iron and paper towels.

With stazon timber brown I stamped the winged skeleton on paper and cut it out.

I stamped the goth raven 3 times with stazon midnight blue.

I once cut out the head and once the top half of the raven, and once a whole raven.

Then I colored them with water based markers.

I made a hanging loop from a piece of string,

 and put some brown stazon on it to make it look a bit older and dirtier.

Now you can put everything together like on the card,

or at your own taste.

On the heart I glued a big red stone in the shape of a heart.

You can still participate in the Halloween challenge.

And you can participate with all stamp brands.

You have a chance to win rubber stamps.

So, read the rules and join the fun.

The team would really like that.

This card is entered in the challenge of:

Two old bats crafty halloween challenge

Simon says stamp, wednesdaychallenge

Sweet stampin challenge blog

31 Days of Halloween. Day 23, Halloween necklace.

Hello everybody, 

I made a Halloween necklace for Halloween.

Here is what I used and how I made it.

I used:

LCD articulated skeleton and Carmens Veranda winged skeleton.

I would like to point out that,

 these stamps are very large which makes them very suitable for shrink foil.

If the stamp is too small, a small image will remain after shrinking.

Which you can barely see.

                                       Shrink plastic, in the Netherlands its cald "krimpie Dinkie".

Black Stazon

Color pencils or markers.

We r memory keepers- Multi hole punch

Metal chain

metal rings

2 small pliers

Sissors

pencil for drawing.

Heattool

I started by printing the stamp with stazon and letting it dry well.

With a pencil I drew a shape around the print and cut it out.

Be very careful to punch the holes first.

You have to cut this as shown in the photo.

This is where the rings will hang later.

Erase all pencil lines after cutting.

Now you can color the image.

Do this with light colors and fairly thin.

The melting will make the color much darker.

After heating it with the heattool it looks like this.

Now we repeat all this again with 4 x a bone of the large skeleton.

And dont forget to punch the wholes.

I colored the bones with a sand color.

Now we attach the rings and the chain to it.

And you are done.

Hope you had fun with this tutorial.

It would be great if you also join our Halloween challenge. 

Make a card, tag, mixed media project or whatever you can think of. 

If only it has some stamping on it. 

 You don't even have to use the Lost Coast stamps,

Other brands are also allowed.

So come and take a look at our challenge blog and join us.

You maybe the winner of new rubber stamps.

To go to the challenge click here!!!!!!

This necklace joins the challenge of,

https://twooldbatshalloweenchallenge.blogspot.com/

https://www.simonsaysstampblog.com/mondaychallenge/

http://sweetstampinchallengeblog.blogspot.com/

31 Day's of Halloween, Day 12, Crows

Welcome back to Lost Coast Portal to Creativity where Lost Coast Designs and Carmen's Veranda collide to bring you twice the inspiration and double the fun!

Hello everyone,

No tutorial today, I forgot to take the pictures.

But I'll give you a brief explanation.

What did I use:

LCD stamp, 4 ravens

LCD stamp Birds in trees

distress oxide,

dusty concord

crackling campfire

spiced marmalade

musterd seed

A waterproof black ink (Stazon)

color pencils

mask tape

white gel pen

First I stamped and masked the trees.

Then I sponged the entire card with musterd seed.

Then you stick a circle of masking tape, this will be the moon.

Then you will apply the colors.

From below you leave a border yellow,

then spiced marmalade, then crackling campfire.

And finally dusty concord.

Spray a light mist of water to get some spots.

Remove the moon mask, and apply some spiced marmalade on the moon with a small sponge.

Remove the trees mask.

Stamp the 4 ravens on a paper and color them.

Cut them out without the moon and lower loose feather.

Stamp the 4 ravens on the card with stazon but without the moon and the feather at the bottom of the stamp.

Glue the cut out 4 ravens to the stamp imprint on the card.

Give it some shade with a black pencil.

Give the ravens and feathers some accents with a white gel pen.

I hope you liked it.

Come and participate in this super fun challenge.

Follow the link and join in the fun, then you have a chance to win new stamps.

Good luck and see you next time.

This card is entered in the challenge of:

Simon says Monday challenge, Spooky halloween.

http://sweetstampinchallengeblog.blogspot.com/2021/10/sweet-stampin-all-hallows-eve.html

# 131 31 Day's of Halloween. Day 9, Tutorial

Hello  my stamping friends.

Good (spooky)day to all of you.

Are you getting the kreeps already???

Well I am!!!

This time I made a tag.

And this is what I used:

Lost coast design stamps,

Spiderweb background and Articulated skeleton.

Distressink 

squeezed lemonade,

shabby shutters,

black soot,

dusty concord,

crackling campfire.

Distress oxide 

Spiced marmalade.

Versafine onyx black

Stencil From Dutch doobadoo wyber.

 white gellpen

Bat die cuts 

This is how I made the tag.

First I colored the tag with water drops using squeezed lemonade and shabby shutters.

Let the tag dry well and then sponge with the stencil and crackling campfire here and there.

Stamp the spider web over it with versafine black.

Sponge the side's with distressink Dusty concord and black soot.

Take a strip of paper and make it orange with distress oxide spiced marmalade.

Immediately put some water drops on it and absorb the color with a paper towel.

This way you get nice light spots.

Stamp the skeleton with Versafine onyx black.

Give the skeleton some highlights with the white gellpen.

Now die cut the bats and give them orange glitter eyes.

Assemble the tag and you're done.

We would love to see your work too.

So join us in our 31 Days of Halloween challenge.

It ends on October 31.

Make something fun with the Halloween theme.

It must be stamped on, but the stamps can also be from other brands.

You have a chance to win stamps of your choice, isn't that nice?

This tag joins the challenge of,

Two old bats Halloween challenge.

#131 31 days of Halloween, witches shoe Tutorial.

 Hi there, Riet here.

Halloween is a real American celebration. 

But in recent years you see Halloween more and more in other countries. 

I think it's because of the internet and movies. 

It's just so much fun dressing up and escaping the daily things of life. 

But I love how the Americans celebrate it, all those beautiful decorations, amazing. 

So I thought, I will make something that can be used as decoration. 

And after a scavenger hunt on Pinterest, I saw the cute witch shoes. 

 I had bought a template of a shoe years ago and never used it. 

So now is a great opportunity to use it.

This is a list of the thigns I used.

Lost Coast Designs stamps:

Fourth dimension

Moon face, Just faces set

spiderweb background

witch 2

Carmen's veranda,

Witches go riding

Distress Oxide:

spiced marmalade

Seedless Preservers

distress ink:

spiced marmalade

Seedless preservers

twisted lemon

antique linen

Mustard seed

Distress micro glaze

Versafine onyx black

some ribbons

Plastic mini pumpkins

decorations

dry moss

Toothpics

black paint or paint marker

This is how I made it.

I started with drawing and cutting the template.

On the toe part of the shoe I stamped the fourth dimension background with Versafine onyx black.

When it is dry, sponge it with Distress antique linen.

Sponge the sides of the nose with Distress Ink Spiced marmalade

The sides and back of the shoe are stamped with Spiderweb stamp,

 and Distress micro glaze.

Then sponged with Distressink Twisted citron.

And the edges with Distressink Seedles preserves.

Sponge the insides of the shoe with Distress Oxide spiced marmalade .

With a sponge with a with open structure I made little spots with Distress oxide Seedles preserves.

Now it is time to glue the shoe together.

Whyle the shoe is drying,

we are going to stamp the witch and the moon with versafine black.

We color the stamps with distressink.

Take 2 toothpicks and paint them black.

Gleu them on the witch and moon.

We stamp the sentiment on paper and run it through a die cut machine.

If you don't have one, you can probably cut something out yourself.

Sponge the die cut with Distressink twisted citron and spiced marmalade.

Now we are going to finish the shoe with ribbons and embellishments.

You can decorate according to your own idea.

I hope you found it a nice tutorial.

Our team would love it if you would participate in our Halloween challenge.

This runs until the end of the month, and al brands are allowed to join.

You have a chance to win free rubberstamps.

The challenge.

Please read the rules first.

This shoe joins the challenge of,

Two old bats Halloween challenge.